The Signalling Record Society
RailRef Line Codes NL
Signal Fact 4
Around 1834 the first rotating board signals worked by a handle at the bottom of the post began to appear on the Liverpool & Manchester Railway.
North London Railway
This page should be regarded as “Work in Progress”. The webmaster will welcome additional information for this page.
In the list below the information is set out in tabular form, spread over four columns. The column entries are -
|RailRef||The Line Code used in RailRef system.|
|Line Detail||The principal locations included within the Line Code. They are arranged in 'down' direction order. Locations shown are primarily stations and junctions to allow easy cross check against published atlases. Signal box names appear in italics where these are 'intermediate' to stations or have been shown to facilitate links from other pages on this web site. The inclusion of a station or junction name does not imply that there was always a signal box of that same name!|
|SBR||The section reference used in the relevant Signal Box Register published by the Society.|
|ELR||The corresponding Engineer's Line Reference(s). This will be blank for railways that never came within British Railways terms of reference. It will also be blank where British Railways had no surviving responsibility for infrastructure at the time the ELR system came into use.|
The North London Railway became operationally part of the London North Western Railway from 1 February 1909, although the company was not wound up until 1922. All lines are included in the LNWR list.